Siemens SINAMICS V90 Operating Instructions Manual page 85

Attaching the line supply cable
Risk of injury due to improper cable connection
When attaching the line supply cable to a line supply connector that has not been fixed on
the drive, you can injure your fingers.
• Make sure you first fix the line supply connector on the drive, and then attach the cable
200 V variant
● For FSA and FSB
● For FSC and FSD
400 V variant
● For FSAA and FSA
You can attach the line supply cable with the same method for 200 V variant drives of
frame sizes FSC and FSD.
● For FSB and FSC
The FSB and FSC servo drives are equipped with barrier terminals for line supply
connection. You can fix the line supply cable on the servo drives by using the M4 screws
with a tightening torque of 2.25 Nm (19.91 lb.in).
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E36037884-002
CAUTION
to the connector.
Connecting
4.2 Main circuit wirings
85