Siemens SINAMICS V90 Operating Instructions Manual page 294

Parameters
10.2 Parameter list
Par. No. Name
p1670 Current setpoint filter 3
numerator natural fre-
quency
Description: Sets the numerator natural frequency for current setpoint filter 3 (general filter).
Dependency: Current setpoint filter 3 is activated via p1656.2 and parameterized via p1668 ... p1671.
p1671 Current setpoint filter 3
numerator damping
Description: Sets the numerator damping for current setpoint filter 3.
Dependency: Current setpoint filter 3 is activated via p1656.2 and parameterized via p1668 ... p1671.
p1673 Current setpoint filter 4
denominator natural fre-
quency
Description: Sets the denominator natural frequency for current setpoint filter 4 (PT2, general filter).
Dependency: Current setpoint filter 4 is activated via p1656.3 and parameterized via p1673 ... p1675.
p1674 Current setpoint filter 4
denominator damping
Description: Sets the denominator damping for current setpoint filter 4.
Dependency: Current setpoint filter 4 is activated via p1656.3 and parameterized via p1673 ... p1675.
p1675 Current setpoint filter 4
numerator natural fre-
quency
Description: Sets the numerator natural frequency for current setpoint filter 4 (general filter).
Dependency: Current setpoint filter 4 is activated via p1656.3 and parameterized via p1673 ... p1675.
p1676 Current setpoint filter 4
numerator damping
Description: Sets the numerator damping for current setpoint filter 4.
Dependency: Current setpoint filter 4 is activated via p1656.3 and parameterized via p1673 ... p1675.
p2153 Speed actual value filter
time constant
Description: Sets the time constant of the PT1 element to smooth the speed/velocity actual value.
The smoothed actual speed/velocity is compared with the threshold values and is only used for messages and
signals.
p2161 * Speed threshold 3
Description: Sets the speed threshold value for the signal that indicates the axis is stationary.
p2162 * Hysteresis speed n_act >
n_max
Description: Sets the hysteresis speed (bandwidth) for the signal "n_act > n_max".
294
Min Max
0.5 16000.0
0.000 10.000
0.5 16000.0
0.001 10.000
0.5 16000.0
0.000 10.000
0 1000000
0.00 210000.00
0.00 60000.00
Factory Unit Data
Setting type
1000.0 Hz Float
0.010 - Float
1000.0 Hz Float
0.300 - Float
1000.0 Hz Float
0.010 - Float
0 ms Float
10.00 rpm Float
0.00 rpm Float
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E36037884-002
Effective Can be
changed
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U