6.5.7
Adjusting AI offsets
NOTICE
Connect to ground
You must firstly connect the AI1 or AI2 to ground and then adjust AI offset.
Refer to section "Analog inputs (Page 99)".
With the BOP function menu "A OFF1" or "A OFF2", AI offset can be adjusted automatically.
Proceed as follows to adjust AI offset:
● Adjust AI1 offset
● Adjust AI2 offset
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E36037884-002
Basic operator panel (BOP)
6.5 Auxiliary functions
157