Display L2Vpn Pw - HP FlexFabric 12500 Command Reference Manual

Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
xconnect-group group-name: Displays L2VPN information for Layer 3 interfaces bound to cross-connects
in the cross-connect group specified by its name, a case-sensitive string of 1 to 31 characters.
interface-type interface-number: Displays L2VPN information for the specified interface.
Usage guidelines
If no parameters are specified, this command displays L2VPN information for all Layer 3 interfaces
bound to cross-connects.
The command does not display L2VPN information for service instances. To display this information,
execute the display l2vpn service-instance command.
Examples
# Display L2VPN information for all Layer 3 interfaces bound to cross-connects.
<Sysname> display l2vpn interface
Total number of interfaces: 2, 2 up, 0 down
Interface
Vlan10
Vlan11
Table 39 Command output
Field
Owner
Link ID
Type
Related commands
display l2vpn service-instance

display l2vpn pw

Use display l2vpn pw to display PW information.
Syntax
display l2vpn pw [ xconnect-group group-name ] [ protocol { bgp | ldp | static } ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
Owner
vpws1
vpws2
Description
Cross-connect group name.
Link ID of the AC.
L2VPN type: VPLS or VPWS.
126
Link ID State
0 Up
0 Up
Type
VPWS
VPWS