14.4
Removing the radiator cover
14.5
Checking the antifreeze and coolant level
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
–
Position the matching radiator cover (
The larger holding lug is located at the top left.
Info
Do not use both radiator covers at the same time.
H01341-10
–
Position radiator shield
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount and tighten screws
Guideline
Remaining screws,
K00460-10
chassis
–
Remove screws
–
Remove screws
–
Take off radiator shield
–
Remove the radiator cover.
–
Position radiator shield
–
Mount and tighten screws
Guideline
Remaining screws,
K00460-10
chassis
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
COOLING SYSTEM 14
p. 94).
3
.
2
.
M6
10 Nm (7.4 lbf ft)
1
.
M6
10 Nm (7.4 lbf ft)
1
.
2
.
3
.
3
.
2
.
M6
10 Nm (7.4 lbf ft)
1
.
M6
10 Nm (7.4 lbf ft)
95