Output Data - Siemens PSU8600 Manual

Engineering and remote access
7.6 Cyclic and acyclic data
Slot Subslot Data
Channel3 operation state
1-6 5 Channel4 output voltage [10mV]
Channel4 output current [10mA]
Channel4 operation state
Detailed information about the individual operating states can be found in Section Operating
states SITOP CNX8600 (Page 176)
Input data SITOP BUF8600
SITOP BUF8600 100 ms/40 A and SITOP BUF8600 300 ms/40 A
Slot Subslot Data
1-6 1 Fill byte(s)
Fill byte(s)
Fill byte(s)
Fill byte(s)
Buffer operation state
SITOP BUF8600 4 s/40 A and SITOP BUF8600 10 s/40 A
Slot Subslot Data
1-6 1 Fill byte(s)
Fill byte(s)
Fill byte(s)
Fill byte(s)
Buffer operation state
Charging state [0-100%]
Buffering disabled by input [0/255]
Detailed information about the individual operating states can be found in Section Operating
states SITOP BUF8600 (Page 177)
7.6.1.2

Output data

In the following tables you can find an overview of the output data, which is cyclically sent
from the PROFINET IO-Controller to the SITOP PSU8600 and the expansion modules.
172
Description
Operating state at output 3 of the power
supply system.
Actual voltage at output 4 of the power
supply system.
Actual load current at output 4 of the
power supply system.
Operating state at output 4 of the power
supply system.
Description
-
-
-
-
Operating state of the
buffer module SITOP BUF8600.
Description
-
-
-
-
Operating state of the
buffer module SITOP BUF8600.
Charge state of the
buffer module SITOP BUF8600.
Buffer module SITOP BUF8600 was
deactivated via the control contact.
Data size
Unsigned8
Unsigned16
Unsigned16
Unsigned8
Data size
Unsigned16
Unsigned16
Unsigned16
Unsigned16
Unsigned8
Data size
Unsigned16
Unsigned16
Unsigned16
Unsigned16
Unsigned8
Unsigned8
Unsigned8
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76