Siemens PSU8600 Manual page 258

Engineering and remote access
7.8 OPC UA server
ParameterSet
/
All variables of the SITOP BUF8600 buffer module are listed together under the
"ParameterSet" node.
SlotId
Display name
SlotId
Expansion modules SITOP CNX8600
ActualState
Display name
ModuleState
ModuleStateLed
With variables "Colour" and "State"
1)
Alarm
Display name
Alarm_F_CommunicationToModule Boolean
Alarm_F_General
Alarm_F_IncompatibleModule
Detected
Alarm_F_ModuleDefect
Alarm_F_ModuleParametersCorrupt Boolean
Alarm_F_SoftwareUpdating
Alarm_F_UnexpectedEmptySlot
Detected
Alarm_F_UzkHigh
258
Data type Definition
UInt16 PropertyType
Data type Definition
Byte MultiStateDiscrete-
Type
Object Sitop_8600_LedType
1)
Data type Definition
Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Description
Description
Operating mode
Status of the LED at the buffer
module
Description
Communication with the expansion
module is faulty. All outputs on the
expansion module have been
switched off.
General error
The module has a module type that
is incompatible with the configura-
tion. The module cannot be com-
missioned.
A hardware failure has occurred.
All outputs of the power supply
system have been switched off.
Stored module configuration is
corrupt. The module cannot start
up correctly.
Performing firmware update.
Read/write access is currently not
possible.
Unexpected empty slot detected
Voltage of the internal supply is too
high. All outputs of the power sup-
ply system have been switched off.
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76