Siemens SITOP PSU2600 3ph Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Power Supply
  5. SITOP PSU2600 3ph
  6. Manual
Siemens SITOP PSU2600 3ph Manual

Siemens SITOP PSU2600 3ph Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SITOP power supply
SITOP PSU2600 3ph
Manual
SITOP PSU2600 24 V/20 A
6EP4436-0SB00-0AY0
01.2018
A5E39263454-2-76
___________________
Overview
___________________
Safety information
___________________
Description, device design,
dimension drawing
___________________
Mounting/removal
___________________
Mounting position, mounting
clearances
___________________
Installation
___________________
Technical data
___________________
Safety, approvals, EMC
___________________
Environmental conditions
___________________
Applications
___________________
Environment
___________________
Service & Support
1
2
3
4
5
6
7
8
9
10
11

Advertisement

Table of Contents
loading

Related Manuals for Siemens SITOP PSU2600 3ph

Summary of Contents for Siemens SITOP PSU2600 3ph

  • Page 1 ___________________ Overview ___________________ Safety information ___________________ Description, device design, SITOP power supply dimension drawing ___________________ Mounting/removal SITOP PSU2600 3ph ___________________ Mounting position, mounting clearances ___________________ Installation Manual ___________________ Technical data ___________________ Safety, approvals, EMC ___________________ Environmental conditions ___________________ Applications ___________________...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Overview

    ● A soft characteristic can be selected for a parallel connection (for uniform load distribution of power supply units of the same type) ● Operating status is displayed using LED ● Signaling contact "24 V O.K" SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 4 Overview Ordering data Regulated power supply unit SITOP PSU2600 3ph Type Order number Input 3AC 400 - 500 V, 6EP4436-0SB00-0AY0 Output 24 V DC / 20 A Validity This manual provides information on the following products: ● SITOP PSU2600 basic device 24 V DC/20 A...

  • Page 5: Table Of Contents

    Protection and monitoring ....................... 31 MTBF ............................31 Mechanical system ......................... 31 Dimension drawing ......................... 32 Safety, approvals, EMC ........................... 33 Safety ............................33 Test voltage ..........................34 Approvals ..........................35 EMC ............................35 SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 6 Table of contents Environmental conditions ......................... 37 Applications ............................. 39 Parallel connection to increase the power rating ..............39 Series connection for increased voltage ................41 Environment ............................43 Service & Support ............................ 45 SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 7: Safety Information

    Before installation or maintenance work can begin, the system's main switch must be switched off and measures taken to prevent it being switched on again. If this instruction is not observed, touching live parts can result in death or serious injury. SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 8 Safety information SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 9: Description, Device Design, Dimension Drawing

    Description, device design, dimension drawing Device description SITOP PSU2600 3ph is a primary-clocked power supply for connection to a 3-phase AC line supply. An electronically regulated DC voltage that can be set via a potentiometer is available at the output of the device. The output of the device is isolated, no-load proof and short-circuit proof.

  • Page 10: Connections And Terminal Designation

    "+" ② 2 screw terminals output "–" ④ One screw terminal each Signaling contact ⑥ One screw terminal each Reset Do not subject the end stop to higher loads Figure 2-2 Terminal data SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 11: Potentiometer

    P is exceeded. rated Note It is only permissible to use an insulated screwdriver when actuating the potentiometer. For information on actuating the potentiometer (screwdriver, torque), see Figure 2-2 Terminal data (Page 10). SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 12: Status Displays And Signaling

    Starting delay 3 – 5 s after 1/0 signal edge Input current, max. 10 mA Voltage strength (test voltage), 5 kV AC with respect to PE/ AC input / DC output. Figure 2-4 Potentiometer, signaling Figure 2-5 Signaling contact, reset SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 13 6EP4436-0SB00-0AY0 (24 V/20 A) Green LED lit Normal operation, output voltage > 20 V ± 0.5 V Signaling contact, contact closed LED off Output voltage < 20 V Signaling contact, contact open (quiescent position) SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 14: Block Diagram

    Description, device design, dimension drawing 2.5 Block diagram Block diagram Figure 2-6 Block diagram SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 15: Dimensions And Weight

    Description, device design, dimension drawing 2.6 Dimensions and weight Dimensions and weight Figure 2-7 Dimension drawing 6EP4436-0SB00-0AY0 (24 V/20 A) Dimensions (W × H × D) in mm 90 × 125 × 125 Weight approx. 1.2 kg SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 16 Description, device design, dimension drawing 2.6 Dimensions and weight SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 17: Mounting/Removal

    WARNING Installing the device in a housing or a control cabinet The SITOP PSU2600 3ph power supply is a built-in device. It must be installed in a housing or control cabinet, to which only qualified personnel have access. The device can be mounted in a control cabinet on standard mounting rails (see Chapter...
  • Page 18 Mounting/removal SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 19: Mounting Position, Mounting Clearances

    A clearance of at least 50 mm should be maintained above and below the device (maximum depth of the cable duct, 50 mm). No space is required at the side. Output current as a function of the ambient temperature Figure 4-1 Output current in the standard mounting position SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 20: Other Mounting Positions

    Particularly when installing on a vertically fastened standard mounting rail, additional measures may be required, e.g. to prevent the device from slipping on the rail. Figure 4-2 Mounting position 1 Figure 4-3 Mounting position 2 SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 21 Mounting position, mounting clearances 4.2 Other mounting positions Figure 4-4 Mounting position 3 Figure 4-5 Mounting position 4 Figure 4-6 Mounting position 5 SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 22 Mounting position, mounting clearances 4.2 Other mounting positions SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 23: Installation

    Line-side connection The SITOP PSU2600 3ph power supply is designed for connection to a 3-phase AC line supply (TN or TT system according to IEC 60364-1) with a rated voltage of 400 - 500 V, 50 - 60 Hz.
  • Page 24 Installation 5.1 Line-side connection The protective conductor of the line supply must be connected at the PE terminal. NOTICE Country-specific regulations must be observed when installing. SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 25: Output-Side Connection

    5.2 Output-side connection Output-side connection The SITOP PSU2600 3ph power supply provides at its output an isolated (= non-grounded) SELV output voltage (Safety Extra Low Voltage). The output of the power supply is no-load, overload and short-circuit proof. If an overload occurs, the electronic current limiting function limits the output current to a maximum value (see Section Technical data (Page 27)).
  • Page 26 Installation 5.2 Output-side connection SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 27: Technical Data

    Integrated input fuse None Protection in the line feeder cable (IEC 898) required: 3-pole, coupled miniature circuit breaker 6 - 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL489-listed, DIVQ) SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 28: Output

    2.5 s Voltage rise, typ. 150 ms Rise time of the output voltage, max. 500 ms Rated current I 20 A out rated Current range 0 - 20 A Active power output, typ. 480 W SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 29 Figure 6-2 Starting delay/voltage rise Figure 6-3 Output characteristic single operation The device supplies a constant output voltage until the current limit is reached. In the event of an overload, the output current is reduced. SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 30: Efficiency

    Dyn. load regulation (I : 50/100/50 %), U ± typ. Load step regulation time 50 to 100 %, typ. 0.2 ms Load step regulation time 100 to 50 %, typ. 0.2 ms Regulation time, max. 10 ms SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 31: Protection And Monitoring

    Product feature of the housing: housing that can be lined up next to one another Type of mounting: Wall/panel mounting Type of mounting: Rail mounting Type of mounting: S7-300 rail mounting Mounting Can be snapped onto standard mounting rails TH 35-15/7.5 (EN 60715) SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 32: Dimension Drawing

    Technical data 6.8 Dimension drawing Dimension drawing See Section Dimensions and weight (Page 15) CAD data that can be downloaded from the Internet: 6EP4436-0SB00-0AY0 (http://www.automation.siemens.com/bilddb/index.aspx?objKey=G_KT01_XX_01222) SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 33: Safety, Approvals, Emc

    SELV output voltage U according to EN 60950-1 Protection class Class I Degree of protection (EN 60529) IP20 Leakage current, typ. 1.7 mA Leakage current, max. 3.5 mA Test voltage see Test voltage (Page 34) SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 34: Test Voltage

    500 V DC 6000 V DC 1500 V AC 1500 V AC 350 V AC 4000 V AC Note: Tripping current for DC measurement: 0 mA Tripping current for AC measurement: < 100 mA SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 35: Approvals

    Line harmonics limit EN 61000-3-2 Class A Generic standards EN 61000-6-2 Noise immunity for industrial environments EN 60601-1-2:2015 Medical sector (also refers to EN 61000-6-2 and EN 61000-6-3) EN 61000-6-3 Emission for residential areas SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 36 Safety, approvals, EMC 7.4 EMC SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 37: Environmental Conditions

    , test duration 11 ms Atmospheric pressure Operation: 1080 - 701 hPa (-1000 - 3000 m) • Overvoltage category: • II to 3000 m (EN 60950-1) Storage: 1080 - 660 hPa (-1000 - 3500 m) • SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 38 Environmental conditions SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 39: Applications

    Figure 9-1 Parallel connection Note It is not permissible to take into account simultaneous overload capability (Extra-Power 150% for 5 s/min) of several power supplies connected in parallel when configuring the power supply system. SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 40 For this purpose, a suitable protective circuit (e.g. decoupling diode or DC-capable circuit breaker) must be installed between each "+" terminal of the power supply and the common connection point. SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 41: Series Connection For Increased Voltage

    When connecting two power supplies in series, the continuous, permissible SELV voltage of a maximum of 60 VDC according to EN 60950-1 cannot be guaranteed in the case of a fault. Figure 9-2 Series connection SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 42 Applications 9.2 Series connection for increased voltage SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 43: Environment

    The devices are in conformance with RoHS. As a rule, only non-silicon precipitating materials are used. Disposal guidelines Packaging and packaging aids can and should always be recycled. The product itself may not be disposed of as domestic refuse. SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...
  • Page 44 Environment SITOP PSU2600 3ph Manual, 01.2018, A5E39263454-2-76...

  • Page 45: Service & Support

    Technical support for all IA/DT products can be accessed through the following communication channels: ● Telephone: + 49 (0) 911 895 7222 ● Internet: Web form for support request (http://www.siemens.de/automation/support-request) Technical documentation on the Internet Operating instructions and manuals for SITOP are available in the Internet: Operating instructions/manuals (http://www.siemens.com/sitop/manuals)
  • Page 46 Service & Support Contact persons If you have any questions regarding the use of our products, then contact the Siemens contact person in your regional Siemens sales office. You can find these addresses as follows: ● On the Internet (http://www.automation.siemens.com/partner) ●...

Table of Contents