5.2
Output-side connection
(see Chapter Technical data (Page 45))
③
Figure 5-2
The load to be supplied is connected through output terminals
(terminal cross-sections, see Figure 2-2 Terminal data (Page 11)).
Note
The 0 V of the loads must be routed directly to the power supply using separate cables!
Selectivity modules
Manual, 12.2014, C98130-A7579-A1-1-7629
+24 V output
Output connection
Installation
5.2 Output-side connection
③
labeled OUT 1, 2, 3, 4.
43