Assigning Supplementary Modules To The Sitop Psu8600 Basic Device - Siemens PSU8600 Manual

Engineering and remote access
7.4 SIMATIC STEP 7 in the TIA Portal
7.4.5

Assigning supplementary modules to the SITOP PSU8600 basic device

Assigning a SITOP CNX8600 expansion module
The number of outputs can be increased by using an expansion module. A SITOP PSU8600
basic device can be equipped with a maximum of four SITOP CNX8600 expansion modules.
Expansion module versions:
● 4 outputs with max. 5 A per output, Article number 6EP4436-8XB00-0CY0
● 4 outputs with max. 10 A per output, Article number 6EP4437-8XB00-0CY0
Note
You can combine both expansion module versions with a basic unit. You can freely select
the arrangement at the slots.
The number of expansion modules that can be configured is limited to four.
Preconditions
● SIMATIC STEP 7 in the TIA Portal has been opened and a project has been created.
● A SITOP PSU8600 basic unit has been integrated in the project.
Procedure
1. Select the basic device in the Device view.
2. STEP 7 V14: Navigate in the Hardware catalog to the expansion modules under Power
supply and distribution\Power supplies\SITOP PSU\CNX8600.
STEP 7 V13: Navigate in the Hardware catalog to the expansion modules under Power
Supplies\SITOP PSU\PSU8600\CNX8600.
128
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76