Table of Contents
Advertisement
Engineering and remote access
7.4 SIMATIC STEP 7 in the TIA Portal
Note
It is possible to use different buffer modules in one system. This means, for example, that a
buffer time of 10300 ms (10000 ms + 300 ms) can be implemented. The number of buffer
modules that can be configured is limited to two.
Preconditions
● SIMATIC STEP 7 in the TIA Portal has been opened and a project has been created.
● A SITOP PSU8600 basic unit has been integrated in the project.
Procedure
1. Select the SITOP PSU8600 in the Device view.
2. STEP 7 V14: Navigate in the Hardware catalog to the expansion modules under Power
supply and distribution\Power supplies\SITOP PSU\BUF8600.
STEP 7 V13: Navigate in the Hardware catalog to the buffer modules under
Power Supplies\SITOP PSU\PSU8600\BUF8600.
3. Select the required buffer module in the Hardware catalog.
In the "Information" area you can see information about the buffer module and when
necessary change the preselected version.
130
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76
Advertisement
Table of Contents
