Web Server; Activating The Web Server - Siemens PSU8600 Manual

7.7

Web server

A web browser is used for access and operation.
The following web browsers are suitable:
● Internet Explorer V8 (on Microsoft Windows XP)
● Internet Explorer V10 (on Microsoft Windows 7)
● Internet Explorer V11 (on Microsoft Windows 7)
● Mozilla Firefox from V40 (on Microsoft Windows 7)
● Google Chrome from V44 (on Microsoft Windows 7)
Preconditions
● The computer with installed web browser is connected with the SITOP PSU8600 via
Ethernet.
● The SITOP PSU8600 has an IP address that you know.
● In the MANUAL mode: DIP switch "WEN" (web server enable) is set to "ON". See
Activate the web server for the MANUAL operating mode on the module (Page 73)
● In the REMOTE operating mode: Web server access is activated.
The following sections explain how to activate access to the web server:
– For SIMATIC STEP 7 in the TIA Portal under Parameter assignment (Page 131).
– For SIMATICSTEP 7 under Parameter assignment (Page 156).
7.7.1

Activating the web server

Activating the web server for the first time (MANUAL operating mode)
If the SITOP PSU8600 power supply is in the initial state when originally supplied, then
proceed as follows to activate the web server.
Preconditions
● The SITOP PSU8600 power supply system is switched off.
● DIP switch "REN" (Remote enable) is set to "OFF" (MANUAL operating mode is
activated).
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76
Engineering and remote access
7.7 Web server
199