Siemens PSU8600 Manual page 140

Engineering and remote access
7.4 SIMATIC STEP 7 in the TIA Portal
PROFIenergy output parameters
The outputs are selected by setting a checkmark.
Parameters
Outputs that can be switched off for a PROFIenergy pause
Web server parameters
Parameter
Activate web server on this module
Enable automatic logoff
Permit access only with HTTPS
Enable automatic update
Update interval
● Activate web server on this module
Define as to whether the device may be accessed via the web server. You will find further
information on the web server under Web server (Page 199).
● Enable automatic logoff
Define whether a user should be automatically logged off after closing the web server.
● Permit access only with HTTPS
Define whether access is only permissible with HTTPS.
● Enable automatic update
When you enable "Automatic update" then the actual values of the SITOP PSU8600 and
connected supplementary modules are sent to the web server.
● Update interval
Define the interval in which the actual values are sent to the web server.
140
Default setting
None
Value range
Yes/no
Yes/no
Yes/no
Yes/no
0 / 5 s / 10 s / 20 s / 30 s / 60 s 10 s
Manual, 05.2017, A5E36758446-3-76
Default setting
No
No
Yes
No
Power supply system PSU8600