Engineering and remote access
7.7 Web server
7.7.7.6
User administration
You can access user administration under "HW configuration > General > User
administration > Settings".
User administration
Here, you can change the administrator password and set up the system so that guests can
access the system - and up to 14 additional user accounts with different authorization levels.
Procedure for changing the administrator password
Note
Users "admin" and "guest" are preset and cannot be deleted.
1. Select the "Hardware configuration" menu.
2. Select submenu "General > Improved PN security".
3. Select entry "User administration".
4. Enter the new password in the editor area, in line "admin" under "Password".
5. Enter the new password again under "Confirm password".
6. Load the data to the device, see Loading the configuration (commissioning) (Page 206).
Procedure for setting up a guest access
1. Select the "Hardware configuration" menu.
2. Select submenu "General > Improved PN security".
3. Select entry "User administration".
4. Enter the password in the editor area under "guest" and select the individual access
rights for guest access.
220
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76