Connection At The Output - Siemens SITOP SEL1200 8 x 5 A Equipment Manual

5.2

Connection at the output

(see Chapter Technical data (Page 51))
Figure 5-2
The loads to be supplied are connected at output terminals
(1, ..., 8). (terminal cross-sections, see Figure Terminal data (Page 13)).
Note
The 0 V of the loads must be routed directly to the power supply using separate cables!
SITOP SEL1200-1400
Equipment Manual, 06.2020, A5E46496083-2-76
Output connection
Installation
5.2 Connection at the output
③
labeled OUTPUT 1, 2, 3, 4
49