Siemens PSU8600 Manual page 257

Display name
AlarmF_WrongChecksum
Alarm_MD_General
Alarm_MD_LessCapableModuleDe
tected
Alarm_MD_ModuleParameters
Corrupt
Alarm_MD_Overtemperature
Alarm_MD_OvertemperatureModule Boolean
Alarm_MR_BufferStateBuffering
Alarm_MR_General
Alarm_MR_ModuleParameters
Corrupt
Alarm_MR_MoreCapableModule
Detected
Alarm_MR_NewModuleDetected
Lock
Display name
Lock
MethodSet
Display name
UpdateFirmware
Model
Display name
Model
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76
Data type Definition
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Boolean Sitop_8600_AlarmType
Data type Definition
Object LockingServiceType
Data type Definition
Method -
Data type Definition
LocalizedText PropertyType
Engineering and remote access
7.8 OPC UA server
Description
Defective firmware detected. De-
vice must be reactivated with a
new firmware update.
General critical error occurred. The
device may therefore behave in-
consistently.
A module with reduced power was
detected. Deviating system behav-
ior may be possible.
Stored module configuration is
corrupt. Deviating module behavior
may be possible.
Danger of overtemperature detect-
ed in a system component. Imme-
diate load reduction is
recommended.
Danger of overtemperature detect-
ed in a system component. Imme-
diate load reduction is
recommended.
The power supply system is sup-
plied via the buffer expansion
module(s).
General error occurred. Device
behavior remains consistent, how-
ever.
Stored module configuration is
corrupt. Module behavior remains
consistent, however.
A module with excessive power
was detected. Normal system op-
eration is possible.
New unconfigured module detected
Description
See Lock (Page 248)
Description
Firmware update
Description
Model name of the device
257