Siemens PSU8600 Manual page 224

Engineering and remote access
7.7 Web server
● Dead time for system overload alarm
A system overload alarm is only initiated if a continuous system overload occurs, which is
longer than the set dead time.
● Dead time for power supply failure alarm
A buffer operation alarm is only initiated if the power continuously fails for a time that is
longer than the set dead time.
PROFIenergy parameters
Parameters
Enable PROFIenergy on this device
Time to pause
Time to operate
Time min length of stay
Time max length of stay
Save power consumption
Operate power consumption
Energy consum to pause
Energy consum to operate
Procedure
1. Select the "Hardware configuration" menu.
2. Select submenu "Device configuration".
3. Select entry "PSU8600".
4. Make the required settings in the editor area.
5. Load the data to the device, see Loading the configuration (commissioning) (Page 206).
You can find additional information on configuring the outputs in Chapter Operator control at
the device (Page 53).
224
Value range
Yes/no
0 - 2147483647
0 - 2147483647
0 - 2147483647
0 - 2147483647
0.000 - 100000.000
0.000 - 100000.000
0.000 - 100000.000
0.000 - 100000.000
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76
Default setting
No
0 ms
0 ms
0 ms
0 ms
0.00 kW
0.00 kW
0.00 kWh
0.00 kWh