Table of Contents
Advertisement
No on delay
With the power supply system shut down, bring both DIP switches "STDA" and "STDB" into
position "OFF" (left), to deactivate on delay.
STDA
STDB
25 ms on delay
With the power supply system shut down, bring DIP switch "STDA" into position "ON" (right)
and "STDB" into position "OFF" (left) in order to set the on delay to 25 ms.
STDA
STDB
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76
Operator control at the device
3.7 Setting the on delay
69
Advertisement
Table of Contents
