Siemens PSU8600 Manual page 268

Engineering and remote access
7.10 Parameter write behavior of the SITOP PSU8600
Index 54: OPC UA settings (reading/writing)
Data
OPC UA server enabled
Unencrypted access enabled
OPC UA server port
Index 55: NTP client settings (reading/writing)
Data
NTP client enabled
Padding
NTP server address 1
NTP server address 2
NTP server address 3
NTP server address 4
Index 57: ProfiNet security enhancement settings (reading/writing)
Index for the data: Index 55
Data
DCP Readonly enabled
Padding
Index 64: Identification values (reading/writing)
Data
Contact
Location ID
268
Description
Activate/deactivate the OPC UA interface of the
SITOP PSU8600:
0: disable
•
255: enable
•
Activate/deactivate unencrypted access via the
OPC UA interface of the SITOP PSU8600:
0: disable
•
255: enable
•
Set port for OPC UA interface (1 to 65535)
Description
Activate/deactivate NTP client:
0: disable
•
255: enable
•
Fill byte(s)
IP address of NTP server 1
IP address of NTP server 2
IP address of NTP server 3
IP address of NTP server 4
Description
Fill byte(s)
Description
Name of the contact person. You can change the
name to suit your requirements.
Location designation: Indicates the unique location
of the SITOP PSU8600.
Data type
Unsigned8
Unsigned8
Unsigned16
Data type
Unsigned8
Unsigned8
String[16]
String[16]
String[16]
String[16]
Data type
Unsigned8
Unsigned8
Data type
String(64)
String(44)
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76