Siemens PSU8600 Manual page 280

Troubleshooting
8.3 Alarm list web server
ID Severity
2 MD
3 F
4 MD
5 F
6 MD
7 F
8 MD
75 N
45
57 MR
59 MR
60 MR
61 MD
62 F
63 F
76 N
9 F
10 MD
11 MR
21 MR
22 MR
23 N
280
Event
Advance warning against overheat-
ing at output.
Output switched off due to over-
heating.
Advance warning against overheat-
ing at output.
Output switched off due to over-
heating.
Advance warning against overheat-
ing at output.
Output switched off due to over-
heating.
Advance warning against overheat-
ing at output.
Parameter out of permissible value
range.
High-resistance internal supply.
New unconfigured module detect-
ed.
Module with excessive power de-
tected.
Unexpected module type detected.
Module with reduced power de-
tected.
Incompatible module detected
Unexpected empty slot detected.
Parameter out of permissible value
range.
Overload shutdown of the output.
Overload detected at the output.
The actual value of the output
current is above the set advance
warning threshold.
Output is ready to be switched on.
Current limit on the output after
occurrence of an overload.
Output was switched off manually.
Help text
Risk of overheating detected at the output. Immediate load
reduction is recommended.
Overheating was detected at the output. The output has
been switched off.
Risk of overheating detected at the output. Immediate load
reduction is recommended.
Overheating was detected at the output. The output has
been switched off.
Risk of overheating detected at the output. Immediate load
reduction is recommended.
Overheating was detected at the output. The output has
been switched off.
Risk of overheating detected at the output. Immediate load
reduction is recommended.
A control command is attempting to set a value outside the
value range that the hardware module can implement. The
value is automatically limited to the minimum or maximum
permitted value for the module.
High-resistance internal supply detected. Check connec-
tions!
New unconfigured module detected.
A module with excessive power was detected. Normal sys-
tem operation is possible.
Unexpected module type detected.
A module with reduced power was detected. Deviating sys-
tem behavior may be possible.
The module has a module type that is incompatible with the
configuration. The module cannot be commissioned.
Unexpected empty slot detected.
A control command is attempting to set a value outside the
value range that the hardware module can implement. The
value is automatically limited to the minimum or maximum
permitted value for the module.
Invalid overload occurred at the output. The output was
switched off.
Output current at the output is above the preset response
threshold but is still within the permissible overload profile.
The output current is about to be limited.
The actual value of the output current is above the config-
ured advance warning threshold and is below the
response threshold.
Output is ready to be switched on again after automatic
overload shutdown.
Output is in overload mode. The output current is limited to
the configured response threshold.
Output was switched off manually directly on the device.
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76