Parameter Assignment; Parameters Of The Basic Units And The Supplementary Modules - Siemens PSU8600 Manual

4. Drag and drop the buffer module in the Device view.
Alternatively, the buffer module can also be added by double-clicking on the entry in the
Hardware catalog.
5. Drag and drop the buffer module to the required slot to the right next to the
SITOP PSU8600.
The buffer module is inserted in the selected slot.
6. Save the hardware configuration.
You have assigned a buffer module to the basic unit.
7.4.6

Parameter assignment

7.4.6.1

Parameters of the basic units and the supplementary modules

The adjustable parameters of SITOP PSU8600 and the supplementary modules being used
can be found in SIMATIC STEP 7 in the TIA Portal in the Inspector window under Properties
if the appropriate device was selected.
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76
Engineering and remote access
7.4 SIMATIC STEP 7 in the TIA Portal
131