Rail Mounting - Siemens PSU8600 Manual

Installation and maintenance

4.2 Rail mounting

4.2 Rail mounting
Basic unit
Risk of electric shock
Before starting installation work of any kind, the main switch of the system must be opened
and measures taken to prevent it from being reclosed. If this instruction is not observed,
touching live parts can result in death or serious injury.
When installing in a control cabinet, basic devices can be snapped onto standard mounting
rails (see Chapter Mechanical system (Page 295)).
1. Position the device with the mounting rail guide at the upper edge of the standard
mounting rail and press down to lock it into place.
2. If it is difficult to snap it into place, simultaneously press the slider using a screwdriver.
84
WARNING
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76