Table of Contents
Advertisement
Engineering and remote access
7.4 SIMATIC STEP 7 in the TIA Portal
7.4.2
Gerätestammdaten-Datei (GSD) installieren
Note
SIMATIC STEP 7 V13
The following step is only relevant for SIMATIC STEP 7 V13 in the TIA Portal.
This GSD file is available at our SITOP home page (http://www.siemens.com/sitop) or
directly under (https://support.industry.siemens.com/cs/ww/en/view/102254061).
Procedure
Proceed as follows to install the GSD file:
1. Download the GSD file from the Internet.
2. Start SIMATIC STEP 7 V13 in the TIA Portal.
3. In the project view, click in the menu "Options" on "Install general station description file
(GSD)" or "Manage general station description file (GSD)".
The "Manage general station description file (GSD)" dialog is opened.
4. Select the source path under which you locally saved the GSD file that you downloaded.
5. Select the GSD file.
6. Click on "Install", and follow the instructions of the installation program.
The installed devices are imported into the module catalog and can then be integrated in the
project.
You can find the SITOP PSU8600 in the hardware catalog under
"Other field devices\PROFINET IO\I/O\Siemens AG\SITOP PSU\PSU8600".
7.4.3
Inserting SITOP PSU8600 into a project
To be able to use the SITOP PSU8600, you must assign an IO controller as IO device
(SIMATIC S7 control). Further, the SITOP PSU8600 in the project can be equipped with one
or several supplementary modules.
124
Power supply system PSU8600
Manual, 05.2017, A5E36758446-3-76
Advertisement
Table of Contents
