Description, device design, dimension drawing
2.1
Device description
SITOP PSU6200 is a primary-clocked power supply for connection to a 3-phase AC line
supply and a DC supply. An electronically regulated DC voltage that can be set via a
potentiometer is available at the output of the device. The output of the device is isolated,
no-load proof and short-circuit proof. The LED display indicates the operating status. The
operating state of the device can be processed via the signaling contact.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Figure 2-1
SITOP PSU6200 3ph
Equipment Manual, 02.2020, A5E44623402-1-76
AC/DC input
DC output
Signaling contact (13, 14)
24 - 28 V potentiometer
Indicator light, diagnostics monitor (O.K., LOAD)
DIN rail slider
Convection
Clearance above/below
Diagnostics interface (COM)
DC voltage level increase (HV)
Parallel operation (PO)
Design
2
9