2.5
Buttons and selector switches
2.5.1
SITOP select
Figure 2-6
The reset button
1. resets all outputs automatically switched off due to an overload condition (see Chapter
Electronic overload shutdown and reset (Page 19)).
2. is used to program the sequential switch-on delay (see Chapter Setting the switch-on
delay time (Page 24).
2.5.2
SITOP PSE200U
Figure 2-7
Selectivity modules
Manual, 12.2014, C98130-A7579-A1-1-7629
Reset button SITOP select
⑥
for the SITOP select selectivity module has the following two functions:
Buttons and selector switches, SITOP PSE200U
Description, device design, dimension drawing
2.5 Buttons and selector switches
17