Extension D/A Converter Module - Mitsubishi Electric NZ2GF2BN-60DA4 User Manual

(1) Remote I/O signals of extension modules
The remote I/O signals differ depending on the model of extension module.
• For the extension D/A converter module, refer to  Page 33, Section 3.5.2.
• For the extension A/D converter module, refer to  CC-Link IE Field Network Analog-Digital Converter
Module User's Manual.
• For the extension I/O module, refer to  CC-Link IE Field Network Remote I/O Module User's Manual.
3.5.2

Extension D/A converter module

Signal direction: Extension D/A converter
Module type
Device No.
RX20
RX21
RX22
RX23
RX24
RX25
RX26
RX27
Extension D/A
converter module
RX28
RX29
RX2A
RX2B
RX2C
RX2D
RX2E
RX2F
Do not use any "Use prohibited" remote I/O signals. If any of the signals are used, correct operation of the module cannot be
guaranteed.
Remote input
moduleMaster/local module
Description
Use prohibited
Use prohibited
Use prohibited
Use prohibited
Use prohibited
Use prohibited
Use prohibited
Use prohibited
Use prohibited
Trigger output completed flag
Use prohibited
Use prohibited
Use prohibited
Use prohibited
Alert output signal
External power supply READY flag
CHAPTER 3 SPECIFICATIONS
Remote output
Signal direction: Master/local moduleExtension D/A
converter module
Device No.
RY20 CH1 Output enable/disable flag
RY21 CH2 Output enable/disable flag
RY22 CH3 Output enable/disable flag
RY23 CH4 Output enable/disable flag
RY24 Use prohibited
RY25 Use prohibited
RY26 Use prohibited
RY27 Use prohibited
RY28 Use prohibited
RY29 Trigger output request
RY2A Trigger output completed clear request
RY2B Use prohibited
RY2C Use prohibited
RY2D Use prohibited
RY2E Alert output clear request flag
RY2F Use prohibited
Description
33
3