Appendices; Appendix 1 Details Of Remote I/O Signals; Appendix 1.1 Remote Input Signals - Mitsubishi Electric NZ2GF2BN-60DA4 User Manual

APPENDICES

Appendix 1
This section describes the details of the remote I/O signals for a master/local module.
The described assignment of device numbers assumes that the remote I/O signals of D/A converter modules are
assigned as follows:
Signal name
Remote input signal
Remote output signal
Appendix 1.1
(1) Warning flag
At the occurrence of a minor error, Warning flag (RX7) turns on.
Eliminating the cause of the minor error occurred and waiting for five seconds results in Latest warning code
(RWr1) turning to 0000H and Warning flag (RX7) turning off.
Latest warning code (RWr1)
Warning flag (RX7)
Remote READY (RXB)
(a) Device number
The device number of this input signal is as follows:
Signal name
Warning flag
Details of Remote I/O Signals
Main D/A converter module
RX0 to RX1F
RY0 to RY1F
Remote input signals
Controlled by the D/A converter module
Minor error occurred
Minor error removed
0000H Error code or alarm code
ON
OFF
ON
RX7
RX20 to RX2F
RY20 to RY2F
5 seconds elapsed
5 seconds
Main D/A converter module
Extension D/A converter module
0000H
OFF
Extension D/A converter module
169
APPX
A