Mitsubishi Electric NZ2GF2BN-60DA4 User Manual page 205

(23)Module operation information initialization completed
This memory area shows whether the module operation information stored in the non-volatile memory is
initialized or not.
b15 b14 b13 b12 b11 b10 b9 b8
0 0
(a) Behavior of module operation information initialization
Upon completion of the initialization of module operation information, Module operation information initialization
completed (address: 1005H) turns to Completed (1). For the timing "Not performed (0)  Completed (1)  Not
performed (0)", refer to the following:
• Module operation information initialization command ( Page 202, Appendix 3 (22))
(b) Default value
The default value is Not performed (0).
(c) Remote buffer memory address
The remote buffer memory address of this area is as follows:
Remote buffer memory name
Module operation information initialization
completed
b7 b6 b5 b4 b3
0 0 0 0 0 0 0
The values of b1 to b15 are fixed to 0.
Main D/A converter module
1005H
b2 b1 b0
0 0 0 0 0 0
0: Not performed
1: Completed
Extension D/A converter module

APPX
A
203