Mitsubishi Electric NZ2GF2BN-60DA4 User Manual page 73

5.
Double-click the item to change the setting, and input the setting value.
• Items to be selected from a pull-down list
Double-click the item to be set, and from the pull-down list that appears, select the desired item.
• Items to be entered via text box
Double-click the item to be set, and enter the desired value.
Enter a value in the text box.
Select an item from
the pull-down list.
The checkbox cannot be
unchecked.
The list cannot be collapsed.
• Station parameter
Mode switch
External signal assignment function
Cyclic data update watch time setting
Extension I/O setting
• Basic module parameter
D/A conversion enable/disable setting
Range setting
Analog HOLD/CLEAR setting
Setting item
Trigger output signal assignment
Alert output signal assignment
Error flag assignment
Warning flag assignment
Input response time setting
Digital output HOLD/CLEAR setting
Setting item
CH1 D/A conversion enable/disable setting
CH2 D/A conversion enable/disable setting
CH3 D/A conversion enable/disable setting
CH4 D/A conversion enable/disable setting
CH1 Range setting
CH2 Range setting
CH3 Range setting
CH4 Range setting
CH1 Analog output HOLD/CLEAR setting
CH2 Analog output HOLD/CLEAR setting
CH3 Analog output HOLD/CLEAR setting
CH4 Analog output HOLD/CLEAR setting
CHAPTER 7 VARIOUS SETTINGS
Reference
Page 85, Section 8.2 (1)
Page 129, Section 8.16.1 (2)
Page 94, Section 8.8
Page 128, Section 8.16.1
Reference
Page 87, Section 8.3
Page 91, Section 8.6
Page 92, Section 8.7
71
7