Mitsubishi Electric NZ2GF2BN-60DA4 User Manual page 145

3.
Open the CC IE Field Configuration window and set up the configuration and station number of a
slave station as shown below.
4.
Close the "CC IE Field Configuration" window.
[CC IE Field Configuration]  [Close with Reflecting the Setting]
5.
Open the refresh parameter setting window and configure the settings as shown below.
6.
Write the set parameters to the CPU module of the master station, and reset the CPU module, or
turn off and on the power supply.
[Online]  [Write to PLC...]
button
button
RESET
or Power OFF ON
CHAPTER 9 PROGRAMMING
143
9