Mitsubishi Electric NZ2GF2BN-60DA4 User Manual page 147

(6) Program example
1.
Create the following programs with GX Works2.
• Program for the main D/A converter module
• Program for the extension D/A converter module
CHAPTER 9 PROGRAMMING
Main D/A converter module
Set CH1 Digital value.
Set CH2 Digital value.
CH1 Output enable/disable flag
CH2 Output enable/disable flag
Check the alert output.
CH1 Digital value range check
CH2 Digital value range check
Processing at the time of CH2
upper limit alert output
Processing at the time of CH2
lower limit alert output
Turn on Alert output clear request flag.
Turn off Alert output clear request flag.
Extension D/A converter module
Set CH1 Digital value.
Set CH2 Digital value.
Set CH3 Digital value.
Set CH4 Digital value.
CH1 Output enable/disable flag
CH2 Output enable/disable flag
CH3 Output enable/disable flag
CH4 Output enable/disable flag
Check the alert output.
CH1 Digital value range check
CH2 Digital value range check
CH3 Digital value range check
CH4 Digital value range check
Processing at the time of CH2
upper limit alert output
Processing at the time of CH2
lower limit alert output
Processing at the time of CH4
upper limit alert output
Processing at the time of CH4
lower limit alert output
Turn on Alert output clear request flag.
Turn off Alert output clear request flag.
9
145