Mitsubishi Electric NZ2GF2BN-60DA4 User Manual page 146

7.
Open the "Parameter Processing of Slave Station" window.
Project window  [Parameter]  [Network Parameter]  [Ethernet/CC IE/MELSECNET] 
[CC IE Field Configuration]  [Online]  [Parameter Processing of Slave Station]
8.
Set "Method selection" to "Parameter write".
9.
Set "Write Value". Follow the next steps to set the value:
• Click the title cell of "Initial Value" to select all the items, and copy them.
• Click the title cell of "Write Value" to select all the items, and paste the copy.
• Select the items to be changed, and set new values as described in Initial settings ( Page 139,
Section 9.3 (3)).
10.
Click
144
button  Select the main D/A converter module in "List of stations". 
button to write the parameters to the D/A converter module.