Extension D/A Converter Module - Mitsubishi Electric NZ2GF2BN-60DA4 User Manual

2.2

Extension D/A Converter Module

This section describes part names of the extension D/A converter module.
*1 Do not remove this seal because it is used for our maintenance purposes.
No. Name
1) RUN LED (green)
2) DIN rail hook
Terminal cover
3)
Terminal block for analog output signals
4) Terminal block for external power supply and FG
22
1)
3) 2)
*1
Indicates the operating status of the extension D/A converter module.
• On: Operating normally.
• Flashing: External power supply being off
• Off: Major error occurred; main analog module being in offset/gain setting mode; or main analog
module being in unit test mode
A hook for mounting a module on a DIN rail
A cover for preventing electric shock while the power is on
A two-piece terminal block for the connection to an external device
A terminal block for the connection of an external power supply (24VDC) and FG
4)
Application