Mitsubishi Electric NZ2GF2BN-60DA4 User Manual page 203

(21)Parameter area initialization completed
This memory shows whether the parameters stored in the non-volatile memory is cleared or not.
b15 b14 b13 b12 b11 b10 b9 b8
0 0
(a) Behavior of parameter area initialization
Upon the completion of setting the parameters stored in the non-volatile memory back to their default values,
Parameter area initialization completed (address: 1003H) turns to Completed (1). For the timing "Not
performed (0)Completed (1)Not performed (0)", refer to the following:
• Parameter area initialization command ( Page 200, Appendix 3 (20))
(b) Default value
The default value is Not performed (0).
(c) Remote buffer memory address
The remote buffer memory address of this area is as follows:
Remote buffer memory name
Parameter area initialization completion
b7 b6 b5 b4 b3
0 0 0 0 0 0 0
The values of b1 to b15 are fixed to 0.
Main D/A converter module
1003H
b2 b1 b0
0 0 0 0 0 0
0: Not performed
1: Completed
Extension D/A converter module

APPX
A
201