Mitsubishi Electric NZ2GF2BN-60DA4 User Manual page 176

(7) External power supply monitor status flag
This signal turns on when the external power supply monitoring function is being activated by External power
supply monitor request flag (RY1F).
External power supply monitor
request flag (RY1F)
External power supply monitor
function
External power supply monitor
status flag (RX1F)
For the external power supply monitoring function, refer to the following:
• External power supply monitoring function ( Page 128, Section 8.16.1 (1))
(a) Device number
The device number of this input signal is as follows:
External power supply monitor status flag
174
Controlled by the D/A converter module
Changed by user
ON
OFF
Disabled
OFF
Signal name
RX1F
Changed by user
Enabled
ON
Main D/A converter module
OFF
Disabled
OFF
Extension D/A converter module
