(4) Connecting and disconnecting a cable
To connect a cable, with the terminal screw loosened using a flathead screwdriver, insert the wire and then
tighten the terminal screw.
To disconnect the cable, with the terminal screw loosened using a flathead screwdriver, pull out the wire.
(5) Cable terminal processing
Strip the cable sheath approximately 10mm from the end.
To use a bar solderless terminal, connect it to the stripped part.
(6) List of bar solderless terminals
The following table lists recommended bar solderless terminals.
Product name
Bar solderless terminal
Bar solderless terminal tool
Bar solderless terminal
Bar solderless terminal tool
58
Model name
Applicable wire size
TE 0.5-10
0.5
TE 0.75-10
0.75
TE 1.0-10
0.9 to 1.0
TE 1.5-10
1.25 to 1.5
NH79
AI 0.5-10WH
0.5
AI 0.75-10GY
0.75
AI 1-10RD
1.0
AI 1.5-10BK
1.5
CRIMPFOX6
Contact
NICHIFU Co., Ltd.
Phoenix Contact Co., Ltd.