(6) Change to any scale
D/A conversion values can be converted to be within any scale, the range of which is determined arbitrarily.
According to a digital value to be input, the scale can be changed without any program, resulting in cost
reduction.
(7) Error detection and error monitoring
An alert issued for a digital value exceeding the range set in advance allows monitoring abnormality of a digital
value and limiting the output of a digital value.
(8) Output without an influence of the sequence scan and link scan
Using the external signal assignment function allows the output of an error status or an alert status from the
extension output module in the event of an error or an alert.
This output is free from the influence of the sequence scan and link scan.
Main D/A converter module
Extension output module
(9) Support for the CC-Link IE Field Network synchronous communication
function
D/A conversion can be performed with a synchronization period of the master station that supports the CC-Link
IE Field Network synchronous communication function.
This enables the D/A converter module to operate at the same timing of other slave stations sharing the same
network.
An error signal occurred in the D/A
converter module can be output to
the extension output module directly.
An error has
occurred.
CHAPTER 1 D/A CONVERTER MODULE
Error lamp
(external device)
Programming is not necessary to
turn on an error lamp when an error
occurs.
1
17