Mitsubishi Electric NZ2GF2BN-60DA4 User Manual page 79

12.
Set "Method selection" to "Parameter write".
13.
Set "Write Value". Follow the next steps to set the value:
• Click the title cell of "Read Value" to select all the items and copy them.
• Click the title cell of "Write Value" to select all the items and paste the copy.
• Select the items to be changed, and set new values.
14.
Click button to open the following window.
15.
Click button.
16.
The parameters are written to the D/A converter module.
Setting up the module parameters of the slave station is now complete.
17.
Close the "CC IE Field Configuration" window.
18.
Click button to open the refresh parameter setting window.
CHAPTER 7 VARIOUS SETTINGS
77
7