Mitsubishi Electric NZ2GF2BN-60DA4 User Manual page 27

Item
Terminal block for
module power
*3
supply and FG
Applicable
solderless
terminal
Terminal block for
analog output
signals
RX/RY points
Cyclic
transmission
RWr/RWw points
Communication cable
Applicability of extension module
External power supply
Weight
*1 For details on the I/O conversion characteristics, refer to the following:
• I/O Conversion Characteristics of D/A Conversion ( Page 204, Appendix 4)
*2 Except for the conditions under noise influence.
*3 Do not connect two or more wires to the terminal.
*4 The conversion period varies depending on whether an extension analog module is connected or not. For details, refer
to the following:
• Conversion Speed and Conversion Period ( Page 88, Section 8.5)
TE 0.5-10 (NICHIFU Co., Ltd.) [Applicable wire size: 0.5]
TE 0.75-10 (NICHIFU Co., Ltd.) [Applicable wire size: 0.75]
TE 1.0-10 (NICHIFU Co., Ltd.) [Applicable wire size: 0.9 to 1.0]
TE 1.5-10 (NICHIFU Co., Ltd.) [Applicable wire size: 1.25 to 1.5]
AI 0.5-10WH (Phoenix Contact Co., Ltd.) [Applicable wire size: 0.5]
AI 0.75-10GY (Phoenix Contact Co., Ltd.) [Applicable wire size: 0.75]
AI 1-10RD (Phoenix Contact Co., Ltd.) [Applicable wire size: 1.0]
AI 1.5-10BK (Phoenix Contact Co., Ltd.) [Applicable wire size: 1.5]
RAV1.25-3 (compliant with JIS C 2805) [Applicable wire size: 0.3 to 1.25]
V2-MS3 (JST Mfg. Co., Ltd) [Applicable wire size: 1.25 to 2.0]
RAP2-3SL (Nippon Tanshi Co., Ltd.) [Applicable wire size: 1.25 to 2.0]
TGV2-3N (NICHIFU Co., Ltd.) [Applicable wire size: 1.25 to 2.0]
32 points + 16 points  Number of extension modules
16 points + Points of each extension module
An Ethernet cable that meets the 1000BASE-T standard:
Category 5e or higher (double shielded, STP), straight cable
Connectable (Max. one module)
24VDC (20.4 to 28.8VDC)
Inrush current: 39.0A, 1ms or lower
Current consumption: 300mA
0.29kg
CHAPTER 3 SPECIFICATIONS
Description
3
25