Mitsubishi Electric NZ2GF2BN-60DA4 User Manual page 72

(2) Setting procedure
1.
Open the "CC IE Field Configuration" window.
• For the master/local module QJ71GF11-T2
Project window  [Parameter]  [Network Parameter]  [Ethernet/CC IE/MELSECNET] 
• For the master/local module LJ71GF11-T2
Project window  [Parameter]  [Network Parameter]  [Ethernet/CC IE Field] 
2.
On the "CC IE Field Configuration" window, from "List of stations", select the main D/A converter
module.
Station list
3.
Open the "Parameter Processing of Slave Station" window.
[CC IE Field Configuration]  [Online]  [Parameter Processing of Slave Station]
4.
Set "Method selection" to "Parameter write".
70
button
button