Table of Contents
Advertisement
8.1
Basic status
The recorder is in the basic status after the
supply has been applied and it has been in-
itialised. The measurement signals are ac-
quired, processed and recorded.
In the basic status the following are indicat-
ed, depending on the setting:
- the instrument designation, date and time
(the time can be switched off via the para-
meter parameter level
- the measurements of all active channels
- one channel, its measurement, designation
and unit
- one channel and its measurement as a
bargraph
- or status/error messages
Display can be cyclic or static:
cyclic display
After approx. 3 sec the pen recorder switch-
es automatically to the subsequent display.
static display
In the basic status the static display is acti-
vated and deactivated with
When it is activated, the current display is
maintained and updated at regular intervals.
The indication can be altered during record-
h
ing with the
and
Status and error messages are always
shown in plain language, flashing regularly,
instead of the current display.
The display of status and error messages
can be stopped and re-activated by pressing
l+r
.
S
Using the
key, the recording is stopped
and re-started. In the stop status the LED
matrix display flashes "STOP" .
8 Programming
display time)
E
.
R
keys.
47
Advertisement
Table of Contents
