Table of Contents
Advertisement
8 Programming
8.1
Basic status
The recorder is in the basic status after the
supply has been applied, and it has been in-
itialised. The measurement signals are ac-
quired, processed and recorded.
In the basic status the following are
indicated:
- the clock time and
- status/error messages, as appropriate.
Status and error messages are flashing reg-
ularly instead of the current display.
S
Using the
key, the recording is stopped
and re-started. In the stop status, the dis-
StOP
play flashes "
".
e
Pressing the
key in the stop status ac-
tivates the chart fast forward.
It is possible to change into the operating
level
by
simultaneously
pressing
the
h
E
+
keys.
29
Advertisement
Table of Contents
