Siemens HiPath 1100 Service Manual page 300

Configuring the system specifically for the client
Comments about the System's Programming Codes
Mailbox Recording Activation (205)
This setting allows you to record a greeting or a message to be played by the EVM.
Type of Mailbox Greeting (206)
This setting defines the type of greeting to be used for a specific mailbox when "Mailbox
Greeting Configuration" is configured as "Manual" (Option 1, Code 207).
Mailbox Greeting Configuration (207)
This option determines the type of greeting to be used for a specific mailbox.
For the "Manual" option, the Type of Greeting selected (1 or 2) must be the same as in the
"Mailbox Greeting Configuration" (Code 206).
The following settings are available for the "Day/Night" option:
Greeting 1 - Day Service
Greeting 2 - Night Service
Message Source (208)
This setting assigns a message to one of the two EVM ports. Alternatively, the message can
be assigned to a MSN.
Message Mode (209)
This setting specifies whether a message will be played only once or repeatedly.
Message for MSN (210)
This setting specifies whether a message will be played for a specific MSN.
System Number (211)
This setting displays the number for the HiPath 1100 when the system is operating in a Point-
to-Point (PP environment.
System Number Type (212)
This setting specifies how a MSN configuration must be sent.
Type of Voice Mail (214)
This setting specifies the type of voice mail to be used by the system.
A31003-K1160-S100-03-7620
7-62
Service Manual