S2M Maintenance - Siemens HiPath 1100 Service Manual

Operation
HiPath 1100 Applications
Select a Country when installing the program, including the appropriate protocol and CAS
●
signaling (e.g., line signaling (1bit-E&M and 2bit-R2), and record signaling (DP, DTMF and
MFCR2)).
For more details on how to configure a TME1 module with E1 CAS access refer to the
program's "Help" system.
If the module does not initialize, check its status on the 7-segment display (see
"TME1 Module" on page 3-33).
6.4.5

S2M Maintenance

The S2M Maintenance is an administrative program for configuring a TME1 module with S2
access.
Hardware Requirements:
– Serial interface communications (COM port).
General Information:
Using the S2M Maintenance you can:
Download software
●
Remove traces
●
Select the software's type of connection to the module (local or via modem)
●
Select a COM port
●
For more details on how to configure a TME1 module with S2 access refer to the program's
"Help" system.
If the module does not initialize, check its status on the 7-segment display (see
"TME1 Module" on page 3-33).
Availability of the HiPath 1100 Manager, HiPath 1100 ADSL Manager, E1 Trunk
Manager and S2M MaintenanceAdministration software is subject to the client's
completion of the technical course for users of the equipment.
6-53
A31003-K1160-S100-03-7620
Service Manual