Installation
Installing an USB Interface
4.10.1
On the HiPath1120/1150
Figure 4-36
Illustration of USB cable connection
Connections
Step
1.
Plug the USB adapter cable (with the male Mini DIN connector) into the 4-pin Mini
DIN connector on the motherboard (Figure 4-36).
2.
Connect the A to B Standard end of the USB cable to the USB adapter, and connect
the other end to the computer or modem.
3.
See System Programming Mode in the "Programming the system using a PC" on
page 6-3.
4-48
Procedure
A31003-K1160-S100-03-7620
Service Manual