Capi Application Setup; Figure 6-31 Windows Xp - Msn - Siemens HiPath 1100 Service Manual

Operation
Driver Installation
6. Enter the MSN-CAPI number (see Table 7-2 on page 7-2) (for HiPath 1120/1150 the
default extension is 10; for HiPath 1190 the default extension is 100) in "Add," in the Multi-
subscriber Numbers" box.
Figure 6-31 Windows XP - MSN
7. The installation of the USB drivers is confirmed. Click "Finish."
8. A message appears informing that HiPath 1000 is being searched. Repeat driver
installation procedures for USB interface devices (Steps 1 to 3)
9. Click "Next" to proceed.
10. A message appears twice to the effect that the driver does not have a Windows logo. Click
"Continue" every time this message appears.
11. The installation of the USB drivers is now completed. CAPI applications installation will
now start automatically (see "CAPI Application Setup" on page 6-31).
6.3.1.3

CAPI Application Setup

CAPI applications installation is very simple and is the same for all Windows operating systems.
Upon conclusion of USB driver installation, the CAPI applications installation window will
appear. Proceed as follows:
1. In this window select the language you want to use and click "OK" to confirm.
2. When the Welcome window appears, click "Next" to proceed. Next, the installation window
will display the (default) path for installation of the CAPI applications (CallBridge for Data
Utilities). You can choose a different path by selecting "Browse." Click "Next" to proceed.
6-31
A31003-K1160-S100-03-7620
Service Manual