Figure 4-15
Mounting HiPath 1150 on the wall
4.7
Installation of Expansion and Option Modules
Installation Information
HiPath 1120 system MB and modules are interconnected using one flat cable (or two) and/or
a pin connector. In the HiPath 1150/1190/1190R systems, the modules are interconnected
through the backplane connector.
For information on how to expand your system, see "Limitations to System Expansion" on page
2-5.
Warning
!
Insert modules only when the power supply is turned OFF.
A31003-K1160-S100-03-7620
Service Manual
Installation of Expansion and Option Modules
Installation
4-15