Table 7-12 Table; Table 7-11 Updating The Software - Siemens HiPath 1100 Service Manual

Updating the Software
Programmed Cod
Functions e
SW Information 001
Local SW Update 060
Activating a SW 055
Update
Day for SW Update 054
Time for SW 058
Update
External Number 056
for Updating the
Software
Frequency for SW 057
Update
Uploading the SW 059
Update
Table 7-11 Updating the Software
Remote Administration
Programmed Cod
Functions e
Service Call *99
4
Remote Software *94
Update 15
Remote Operation 084
Mode
Remote Adminis- 066
tration Activation
External Number 067
Configuration
Remote Adminis- 068
tration Password
Remote MSN 069
A31003-K1160-S100-03-7620
Service Manual
Intermediate Data
∗
- Displays the type of system, soft-
ware release, version number, APS,
and serial number.
Intermediate Data
Number of Service Center
Slot: 1 to 4
Slot: 1 to 4
Configuring the system specifically for the client
Table of the System's Programming Codes
Data to be
Programmed
∗
- To enable
# - To disable
dd (day, from 01 to 31) or
hh:mm (hh from 00 to 23
and mm from 00 to 59)
Number (up to 20 digits)
Month (01 to 12)
hh:mm (hh from 00 to 23
and mm from 00 to 59)
Data to be
Programmed
# - To confirm
1 - Via ISDN
2 - Via Modem
∗
- To enable
# - To disable
Number (up to 20 digits)
00000 to 99999
Slot: 001 to 140 or
∗
- To delete
Completing Default
Data Entry
Any key to
finalize entry.
Automatic
Automatic # - To disable
Automatic 01
Automatic 00:00
# instead of None
the digit or
Automatic
Automatic 01
Automatic 00:00
Completing Default
Data Entry
Automatic
Automatic
Automatic 1 - Via ISDN
Automatic # - To disable
# instead of None
slot position
# instead of None
slot position
Automatic None
7-15