Remote Administration - Siemens HiPath 1100 Service Manual

7.2.8 Remote Configuration
Service Call (*994)
This feature allows you to call a service center and let administration be carried out remotely
through the on-going call.
Remote Software Update (*9415)
If authorized, a software update can be started automatically.
Remote Operation Mode (084)
This specifies the remote updating of the software.
An update can be carried out remotely over external digital ISDN lines and analog lines
connected to a modem.
Remote Administration Activation (066)
This setting allows the system to be administered remotely.
External Number Configuration (067)
This specifies external numbers (Service MSN without external access code 0) that are able to
perform Remote Administration.
The default configuration does not specify a MSN.
Remote Administration Password (068)
This specifies a password (5 digits) for enabling Remote Administration from an external
number (Service MSN).
The default configuration does not specify a password.
Remote MSN (069)
This setting specifies an ISDN line MSN as the Remote MSN.
The system will only allow Remote Administration when this remote MSN is used.
The default configuration does not specify a MSN.
Without MSN Verification (070)
Remote Administration will be performed without verifying the Service MSN that has been
transmitted.
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Comments about the System's Programming Codes
7-53