On The Hipath 1190/1190R; Figure 4-31 Installing Power Supplies On The Hipath 1190/1190R - Siemens HiPath 1100 Service Manual

4.7.9.3

On the HiPath 1190/1190R

Step
1. Check network voltage
2. Remove the system's back cover.
3. If the voltage is within the power supply's range, insert the power supply into the
slots shown in Figure 4-31.
4. Plug the system's AC cord into the AC input on the power supply (see Figure 3-34).
5. Connect to the backplane.
6. Reassemble the entire set.
7. "Performing a Visual Inspection" on page 4-59
8. To turn on the system use the switch located on the back of the cabinet (see Figure
4-10).
9. Configure the required data (see "Operation" on page 6-1).
Figure 4-31 Installing power supplies on the HiPath 1190/1190R
A31003-K1160-S100-03-7620
Service Manual
Installation of Expansion and Option Modules
Procedure
Installation
4-37